Forcing 88.2 -> 44.1?

[Kraft]

Enjoy using Decibel, but I only have USB as an option out of my laptop and my DAC will not accept 88.2 khz. I like to use 'adjust sample rate' option and was wondering if there was a way to force 88.2 to play at 44.1 so I don't have to uncheck that option and adjust the sample rate myself if there are any songs at that sample rate in my selection.

[sbooth]

This should happen automatically. If Decibel notices that your DAC doesn't support the file's sample rate it will select an integer multiple of the sample rate that is supported.

[Kraft]

For some reason it doesn't automatically downsample to 44.1. It tries to play at 88.2 and I get a heavily distorted output (Nuforce HDP btw).

[sbooth]

That is obviously not right. Would you mind to enable logging so I can determine what is happening?

[Kraft]

Sure, I can get the log. May take a week or two as I'm moving. Btw, since logging is needed to troubleshoot issues, any chance of an enable/disable logging button?

[Kraft]

Got a chance to try it out today, hope this helps figure this out:

Fri Jun 8 19:53:14 KD-MB.local Decibel[51915] <Debug>: Opening log
Fri Jun 8 19:53:15 KD-MB.local Decibel[51915] <Debug>: Opening output for device 0x106
Fri Jun 8 19:53:15 KD-MB.local Decibel[51915] <Info>: Opening output for device 0x106 (Built-in Output)
Fri Jun 8 19:53:15 KD-MB.local Decibel[51915] <Info>: Setting output device UID to AppleHDAEngineOutput:8,0,1,1:0
Fri Jun 8 19:53:15 KD-MB.local Decibel[51915] <Info>: Setting output device ID to 0x106
Fri Jun 8 19:53:15 KD-MB.local Decibel[51915] <Info>: Digital volume set to 1
Fri Jun 8 19:53:15 KD-MB.local Decibel[51915] <Info>: Digital volume set to 1
Fri Jun 8 19:53:15 KD-MB.local Decibel[51915] <Info>: Found plug-in: org.sbooth.Decibel.PlugIn.AddSelection
Fri Jun 8 19:53:15 KD-MB.local Decibel[51915] <Info>: Found plug-in: org.sbooth.Decibel.PlugIn.GrowlNotifier
Fri Jun 8 19:53:15 KD-MB.local Decibel[51915] <Info>: Found plug-in: org.sbooth.Decibel.PlugIn.IRRemote
Fri Jun 8 19:53:15 KD-MB.local Decibel[51915] <Info>: Found plug-in: org.sbooth.Decibel.PlugIn.iTunesBrowser
Fri Jun 8 19:53:15 KD-MB.local Decibel[51915] <Info>: Found plug-in: org.sbooth.Decibel.PlugIn.Scrobbler
Fri Jun 8 19:53:15 KD-MB.local Decibel[51915] <Info>: Instantiated plug-in: org.sbooth.Decibel.PlugIn.AddSelection (DecibelAddSelection)
Fri Jun 8 19:53:15 KD-MB.local Decibel[51915] <Info>: Instantiated plug-in: org.sbooth.Decibel.PlugIn.IRRemote (DecibelIRRemote)
Fri Jun 8 19:53:15 KD-MB.local Decibel[51915] <Info>: Instantiated plug-in: org.sbooth.Decibel.PlugIn.iTunesBrowser (DecibeliTunesBrowser)
Fri Jun 8 19:53:54 KD-MB.local Decibel[51915] <Debug>: -stop:
Fri Jun 8 19:53:54 KD-MB.local Decibel[51915] <Info>: Setting output device UID to AppleUSBAudioEngine:Nuforce, Inc.:Nuforce Icon HDP DAC:26220000:3
Fri Jun 8 19:53:54 KD-MB.local Decibel[51915] <Info>: Setting output device ID to 0x108
Fri Jun 8 19:53:54 KD-MB.local Decibel[51915] <Debug>: Closing output for device 0x106
Fri Jun 8 19:53:54 KD-MB.local Decibel[51915] <Debug>: Opening output for device 0x108
Fri Jun 8 19:53:54 KD-MB.local Decibel[51915] <Info>: Opening output for device 0x108 (Nuforce Icon HDP DAC)
Fri Jun 8 19:54:11 KD-MB.local Decibel[51915] <Debug>: -playPause:
Fri Jun 8 19:54:11 KD-MB.local Decibel[51915] <Debug>: -play:
Fri Jun 8 19:54:11 KD-MB.local Decibel[51915] <Info>: Creating decoder for "01 - Art Pepper - Move.flac"
Fri Jun 8 19:54:13 KD-MB.local Decibel[51915] <Info>: Selecting physical format for stream 0x109: 2 ch, 44100 Hz, 'lpcm' (0x0000000c) 24-bit little-endian signed integer
Fri Jun 8 19:54:13 KD-MB.local Decibel[51915] <Info>: Setting stream 0x109 physical format to: 2 ch, 44100 Hz, 'lpcm' (0x0000000c) 24-bit little-endian signed integer
Fri Jun 8 19:54:14 KD-MB.local Decibel[51915] <Info>: -> kAudioStreamPropertyPhysicalFormat [0x109]: 2 ch, 44100 Hz, 'lpcm' (0x0000000c) 24-bit little-endian signed integer
Fri Jun 8 19:54:14 KD-MB.local Decibel[51915] <Info>: Starting playback for "01 - Art Pepper - Move.flac"
Fri Jun 8 19:54:14 KD-MB.local Decibel[51915] <Info>: Device sample rate (44100 Hz) doesn't match decoder sample rate (88200 Hz)
Fri Jun 8 19:54:14 KD-MB.local Decibel[51915] <Info>: Setting device 0x108 sample rate to 88200 Hz
Fri Jun 8 19:54:14 KD-MB.local Decibel[51915] <Info>: -> kAudioStreamPropertyPhysicalFormat [0x109]: 2 ch, 88200 Hz, 'lpcm' (0x0000000c) 16-bit little-endian signed integer
Fri Jun 8 19:54:14 KD-MB.local Decibel[51915] <Info>: -> kAudioStreamPropertyVirtualFormat [0x109]: 2 ch, 88200 Hz, 'lpcm' (0x00000009) 32-bit little-endian float
Fri Jun 8 19:54:14 KD-MB.local Decibel[51915] <Warning>: Ring buffer has invalid format
Fri Jun 8 19:54:14 KD-MB.local Decibel[51915] <Warning>: CreateConvertersAndSRCBuffer failed
Fri Jun 8 19:54:14 KD-MB.local Decibel[51915] <Info>: -> kAudioDevicePropertyNominalSampleRate [0x108]: 88200 Hz
Fri Jun 8 19:54:14 KD-MB.local Decibel[51915] <Info>: Enqueuing "01 - Art Pepper - Move.flac"
Fri Jun 8 19:54:14 KD-MB.local Decibel[51915] <Info>: Device preferred stereo channels: 1 2
Fri Jun 8 19:54:14 KD-MB.local Decibel[51915] <Info>: Stream 0x109 information:
Fri Jun 8 19:54:14 KD-MB.local Decibel[51915] <Info>: Virtual format: 2 ch, 88200 Hz, 'lpcm' (0x00000009) 32-bit little-endian float
Fri Jun 8 19:54:14 KD-MB.local Decibel[51915] <Info>: Starting channel: 1
Fri Jun 8 19:54:14 KD-MB.local Decibel[51915] <Info>: Channel map:
Fri Jun 8 19:54:14 KD-MB.local Decibel[51915] <Info>: 0 -> 0
Fri Jun 8 19:54:14 KD-MB.local Decibel[51915] <Info>: 1 -> 1
Fri Jun 8 19:54:14 KD-MB.local Decibel[51915] <Info>: Decoding starting for "01 - Art Pepper - Move.flac"
Fri Jun 8 19:54:14 KD-MB.local Decibel[51915] <Info>: Decoder format: 2 ch, 88200 Hz, 'lpcm' (0x0000002c) 24-bit little-endian signed integer, deinterleaved
Fri Jun 8 19:54:14 KD-MB.local Decibel[51915] <Info>: Decoder channel layout: kAudioChannelLayoutTag_Stereo (0x00650002)
Fri Jun 8 19:54:14 KD-MB.local Decibel[51915] <Debug>: Decoding started for "01 - Art Pepper - Move.flac"
Fri Jun 8 19:54:14 KD-MB.local Decibel[51915] <Debug>: Starting device 0x108
Fri Jun 8 19:54:14 KD-MB.local Decibel[51915] <Info>: Creating decoder for "02 - Art Pepper - Groovin' High.flac"
Fri Jun 8 19:54:14 KD-MB.local Decibel[51915] <Info>: -> kAudioDevicePropertyDeviceIsRunning [0x108]: True
Fri Jun 8 19:54:14 KD-MB.local Decibel[51915] <Debug>: Rendering started for "01 - Art Pepper - Move.flac"
Fri Jun 8 19:54:32 KD-MB.local Decibel[51915] <Debug>: -playPause:
Fri Jun 8 19:54:32 KD-MB.local Decibel[51915] <Debug>: -pause:
Fri Jun 8 19:54:32 KD-MB.local Decibel[51915] <Debug>: Stopping device 0x108
Fri Jun 8 19:54:32 KD-MB.local Decibel[51915] <Info>: -> kAudioDevicePropertyDeviceIsRunning [0x108]: False
Fri Jun 8 19:54:34 KD-MB.local Decibel[51915] <Info>: Setting stream 0x109 physical format to: 2 ch, 44100 Hz, 'lpcm' (0x0000000c) 16-bit little-endian signed integer
Fri Jun 8 19:54:35 KD-MB.local Decibel[51915] <Info>: -> kAudioStreamPropertyPhysicalFormat [0x109]: 2 ch, 44100 Hz, 'lpcm' (0x0000000c) 16-bit little-endian signed integer
Fri Jun 8 19:54:35 KD-MB.local Decibel[51915] <Info>: -> kAudioStreamPropertyVirtualFormat [0x109]: 2 ch, 44100 Hz, 'lpcm' (0x00000009) 32-bit little-endian float
Fri Jun 8 19:54:35 KD-MB.local Decibel[51915] <Info>: Using sample rate converter for 88200 Hz to 44100 Hz conversion
Fri Jun 8 19:54:35 KD-MB.local Decibel[51915] <Info>: Device preferred stereo channels: 1 2
Fri Jun 8 19:54:35 KD-MB.local Decibel[51915] <Info>: Stream 0x109 information:
Fri Jun 8 19:54:35 KD-MB.local Decibel[51915] <Info>: Virtual format: 2 ch, 44100 Hz, 'lpcm' (0x00000009) 32-bit little-endian float
Fri Jun 8 19:54:35 KD-MB.local Decibel[51915] <Info>: Starting channel: 1
Fri Jun 8 19:54:35 KD-MB.local Decibel[51915] <Info>: Channel map:
Fri Jun 8 19:54:35 KD-MB.local Decibel[51915] <Info>: 0 -> 0
Fri Jun 8 19:54:35 KD-MB.local Decibel[51915] <Info>: 1 -> 1
Fri Jun 8 19:54:35 KD-MB.local Decibel[51915] <Info>: -> kAudioDevicePropertyNominalSampleRate [0x108]: 44100 Hz