HELP! - Bizarre MAX Error Message

Ask questions and get answers on how to make Max behave.
Post Reply
sonictonic
Posts: 1
Joined: Wed Feb 15, 2012 3:56 pm

HELP! - Bizarre MAX Error Message

Post by sonictonic » Wed Feb 15, 2012 4:01 pm

Hi,

Have used MAX for years - happily and without issue..ever since upgrading my iMAc to Lion - have issues - Most common ERROR message:

Column identifiers used with NSTableView autosave feature must conform to NSCoding protocol: (null)

thus, can't rip anymore - any suggestions..thoughts?

thanks

User avatar
sbooth
Site Admin
Posts: 2447
Joined: Fri Dec 23, 2005 7:45 am
Location: USA
Contact:

Re: HELP! - Bizarre MAX Error Message

Post by sbooth » Fri Feb 17, 2012 12:59 pm

Can you try deleting the preferences (~/Library/Preferences/org.sbooth.Max.plist) and see if that helps?

mattn
Posts: 154
Joined: Tue Sep 02, 2008 4:21 am

Re: HELP! - Bizarre MAX Error Message

Post by mattn » Mon Feb 20, 2012 2:43 am

sonictonic wrote: Column identifiers used with NSTableView autosave feature must conform to NSCoding protocol: (null)
This forum is searchable:

http://forums.sbooth.org/search.php?key ... w+nscoding

As you can see by clicking that link, you're not alone.

kaoweb
Posts: 1
Joined: Sun Mar 23, 2014 1:13 am

Re: HELP! - Bizarre MAX Error Message

Post by kaoweb » Sun Mar 23, 2014 1:32 am

I am new to MAX and unfortunately ran into the same problem every now and then. I tried to delete the .plist as one reply suggested, but problem persists. Here is a work around, which might work. After running into the problem, I quit MAX completed, reject the problem disc, and restart MAX. Run with 2 "good" discs. After that, try with the disc that has the problem. It passes the 2nd time around. Good luck! Hope it might help you.

Post Reply