HELP! - Bizarre MAX Error Message

Ask questions and get answers on how to make Max behave.
Post Reply
sonictonic
Posts: 1
Joined: Wed Feb 15, 2012 3:56 pm

HELP! - Bizarre MAX Error Message

Post by sonictonic » Wed Feb 15, 2012 4:01 pm

Hi,

Have used MAX for years - happily and without issue..ever since upgrading my iMAc to Lion - have issues - Most common ERROR message:

Column identifiers used with NSTableView autosave feature must conform to NSCoding protocol: (null)

thus, can't rip anymore - any suggestions..thoughts?

thanks

User avatar
sbooth
Site Admin
Posts: 2445
Joined: Fri Dec 23, 2005 7:45 am
Location: USA
Contact:

Re: HELP! - Bizarre MAX Error Message

Post by sbooth » Fri Feb 17, 2012 12:59 pm

Can you try deleting the preferences (~/Library/Preferences/org.sbooth.Max.plist) and see if that helps?

mattn
Posts: 152
Joined: Tue Sep 02, 2008 4:21 am

Re: HELP! - Bizarre MAX Error Message

Post by mattn » Mon Feb 20, 2012 2:43 am

sonictonic wrote: Column identifiers used with NSTableView autosave feature must conform to NSCoding protocol: (null)
This forum is searchable:

http://forums.sbooth.org/search.php?key ... w+nscoding

As you can see by clicking that link, you're not alone.

kaoweb
Posts: 1
Joined: Sun Mar 23, 2014 1:13 am

Re: HELP! - Bizarre MAX Error Message

Post by kaoweb » Sun Mar 23, 2014 1:32 am

I am new to MAX and unfortunately ran into the same problem every now and then. I tried to delete the .plist as one reply suggested, but problem persists. Here is a work around, which might work. After running into the problem, I quit MAX completed, reject the problem disc, and restart MAX. Run with 2 "good" discs. After that, try with the disc that has the problem. It passes the 2nd time around. Good luck! Hope it might help you.

Post Reply

Who is online

Users browsing this forum: Yahoo [Bot] and 1 guest